Wednesday, February 26, 2020

Small Stream Fly Fishing with Streamers

A beautiful small stream brookie that was in a plunge pool with fast moving water.
I have noticed that streamer fishing is gaining popularity with fly fishers in recent years. The act of chucking large streamers and feeling the violent take of a large trout is becoming an obsession to many of today's fly anglers.  These anglers may fish all day for just one or two takes, or only moving one or two fish. What if I told you that you could experience the same violent takes and witness aggressive trout behavior as they hunt down your streamer, but on a smaller scale? Would you give this style of fly fishing a try if you could turn those one to two fish days into double digits?  


A fire belly male brook trout that ate my "Go To Brookie Streamer."
The type of streamer fishing I am going to discuss is small stream streamer fishing. In this style of streamer fishing you don’t need to worry about double hauling, and sometimes you don’t even need to put on your waders. Seeing a nine to ten inch native brook trout hunting my streamer like a mako shark fuels my fly fishing fire. This style of fly fishing may not appeal to everyone but I would like to see you give it a chance before you write it off.  It is all about the beauty of the location your are fishing and the colors of the native/wild trout you catch that is the real driver with small stream streamer fishing.  Let’s take a deeper looking into the terminal tackle, fly design & selection, and a few tips and tricks that I use while fishing streamers on small streams.

A stream side photo of my 10' 2 weight Syndicate Fly Rod and Allen Trout II Reel

ROD SELECTION

I have two rod preferences for small stream streamer fishing. The canopy of the stream I am going to fish dictates what rod I will take with me when I get out of my vehicle.  I take both rod lengths with me on my ventures.  You don’t really need a super expensive or eloquent fly rod for this style of fly fishing.  Most of your casts will be either roll casts, or dapping. You are merely swinging the streamer in front of you and landing it in your desired spot.
  •          10’ 2 WEIGHT
    •  more reach and spook less fish
    •  tougher to land fish due to the rod hitting the trees
  •          8’ 3 WEIGHT
    • Easier to cast on streams with tighter canopies
    • Less reach requires you to be closer to the fish and increases the risk of spooking them
The reel is the least important item on your small stream streamer outfit. The reel’s only real function is to hold your fly line and leader. Most of the fish you will catch will not be pulling much drag or taking you into your backing.

A fine specimen of a "Mountain Mako" this buck brookie hammered one of my small  "Go Too Brookie Streamers."

LEADERS

My small stream leaders are nothing more than a butt section of Maxima Chameleon connected to three to four feet of Umpqua Bi-Color Indicator with a small barrel swivel attached to end with a small section of flourocarbon for tippet. You are going to be using heavier flies so you can use the weight of the fly to cast your line. I like these longer leaders as you experience no drag and it is easier to stay connected to your small streamer. This is important as some of the smaller fish may be hard to detect when they hit the fly.

  • 10-15’ of Maxima Chameleon, 3-4’ of Umpqua Bi-Color Indicator, 2-3’ of 4 pound flourocarbon, small swivel
    • Butt section determined by length of rod
      • Add 2-5’ to the rod length to determine butt section length
    • Length of tippet determined by the average water depth of stream
      • 2-3’ on shallow streams
      • 3-4’ on streams with more pools or a 3-4’ average depth

An example of utilizing the different sized dumbell eyes on your streamers in your fly box.

FLY SELECTION

I mainly stick to three main flies when I am streamer fishing on small streams. I like to use lead eye or tungsten bead streamers.  I stick to my "Go To Brookie Streamer" (white crystal buggers), coyote clouser minnow, and crayfish patterns. I have never had any issues catching fish on these three flies. The biggest key to fly selection for fishing streamers on small streams is having a few weight options to cover the different water depths and speeds you will come across on the streams. I stick to size 12-8 for my small stream streamers with size 10 being my favorite.

  •          COYOTE CLOUSER
  •          LEAD EYE CRAYFISH
  •          JIGGY CRAYFISH
FLY DESIGN

I keep my lead eye selection to x-small, small, and medium. If I am using jig hooks, I will use a few different sized slotted tungsten beads from 3.0-4.0mm.  I don’t like to add any form of split shot to my streamers as I feel it does not allow for the right presentation and alters the drift of the streamer.

  • X-SMALL, Used most often, most versatile
  • SMALL- Used in faster shallower riffles
  • MEDIUM- Used in deep fast plunge pools


A winter wild brown trout that ate one of my "Go To Brookie Streamers."

FISHING TIPS

Fishing these streamers is very similar to euro nymphing. You are casting upstream and drifting the streamer toward you. You want to twitch the streamer as it drifts towards you. On small streams that are a bit wider you can cast up stream and twitch the streamer down through the hole and then strip and pause the streamer back towards you. Often a fish will hunt the streamer through the hole and hit the streamer when you pause it, while working it back to you. In winter I often use my small streamers as anchor nymph on streams with a bit more depth . You can dead drift your presentation just as you would while euro nymphing then strip the streamer at the end of your drift. This is a very effective method.

I missed this beautiful buck brookie a few times and came back to him around 20 minutes later. He took a swipe at my "Go To Brookie Streamer" but would not commit. I switched to my "Jiggy Crayfish" and caught him on the first drift.

CONCLUSION

Small stream streamer fishing may not be as exciting to some as “Chucking Meat” from a drift boat on a river, but it has its own unique exhilarating moments. You get to experience the wildness of nature and see fish that have colors so rich that they almost look like they would hurt. You get to witness an up close look at native and wild trout hunting down your streamer and violently attacking it. Out of all the ways to catch native and wild trout on a fly rod, nothing compares to fishing small streamers to me.


Please take a moment to watch this video I did covering the tips and tricks discussed above.

Monday, February 10, 2020

"Blue Line Like a Beast" Next Level Small Stream Fly Fishing Techniques


How in the world did I come up with the title for this article? Should "Blue Line" and "Beast" even be used in the same sentence? The title for this article comes from the methods that I use to locate wild trout and the lengths I go to catch them.  The "Beast" side of this title comes from The Hunting Beast, an amazing group of hunters who are on a different level of hunting than the average hunter.

Beast style hunting requires the hunter to be great at reading topographic maps and have an uncanny ability to put themselves where they need to be, at the right time, to have success. This may mean scouring maps for hours, watching weather forecasts like a hawk, hiking miles through a swamp, and doing things that others may think are crazy to be successful. Dan Infalt, the creator of the Hunting Beast, is great at explaining his advanced deer hunting tactics.  His teachings have increased my deer hunting game tenfold. I hope to do the same for you with understanding the "Beastlike" methods that I use to find and catch wild trout.

One of my favorite captures of a winter time blue line stream.
Blue lining is my favorite way to fly fish. The beautiful and often off grid areas where wild trout reside, combined with the challenge of cracking the code to finding them is what I live for. I see it all to often in today’s fly fishing community where anglers want to know exactly where you are fishing. There are even apps out there where people are uploading wild trout photos and pinning the exact location of where they caught the fish. In a society that wants success to come in an instant, how can a new fly angler learn how to blue line by themselves.  Within this article I will show you some of the techniques that I use to have success. However, if you are looking for instant success or stream names, this article isn't for you.

I often spend hours looking at topographic maps, googling stream names, looking at biologist reports, and surveying small streams. Sometimes these efforts pay off with a stream of blue line glory, other times I may hike in a mile or so only to find a tiny trickle with no canopy.  These great lengths of effort are why so many anglers who are successful at catching wild trout, are also so secretive about their spots. I will not be posting any specific stream names in this article, but I will be showing you how to up your game to find wild trout and the places they live like the ones you will see in the pictures of this article.

A stunning winter native brook trout that chose a small streamer.
In this article I will be covering the advanced techniques that I use to find wild trout. These will include tips on surveying a stream, learning to read and understand topographic maps, utilizing satellite imagery maps, using government funded organizations, and a few other topics that I feel are important in small stream fly fishing. I will not be discussing every single tactic that I use, as I like to encourage anglers to try and learn things for themselves.  I hope to provide you with a solid foundation to explore wild trout streams effectively and efficiently.  Blue lining and instant success should never be used in the same sentence, at least not after you see some of the things that I go through and how much time I put in to discovering these hidden gems.  My main goal is that this article gets you excited to use some my techniques on a few streams in your area and find yourself surrounded by beautiful scenery, and fish that you never even imagined were there.

A picture of my car parked surveying a stream.
First, let's discuss the easiest form of gaining intelligence on a stream. This method is pretty basic, but one I still find myself using regularly.  This method is nothing more than seeing a stream, checking for public access or asking for permission from the land owner, and physically fishing the stream. I find that the fastest way to do this is to look at where the stream in question crosses under a road, or has a large bend in it. Typically the bridge method is the easiest and most effective. I choose these spots first as there are often pools found at these bridge and bend locations that are inviting to wild trout. If you can catch one wild trout at these spots it usually means that there are more throughout the stream.  If I happen to land a wild trout, I would then mark this stream as a potential fishery in my notes. Some of these stops may only take one to two minutes. I have planned outings where all I am doing is scouting different streams.

Much like "Beast Style Hunting" you can use similar game plans to broaden your area of coverage. In my opinion four hours spent spot checking different streams is better than spending four hours on a single stream and not catching a fish. It is always good to have a large number of streams on your list. This will come in handy if your first stream, or fist few streams are blown out from rainfall or froze over. Think of these as back up plans. With hunting I won't go near a spot if the wind is wrong. With blue lining you get a little more leeway with the intelligence of a native brook trout compared to the nose of a whitetail deer, but you can understand that hitting areas when the conditions are right will increase the amount of fish you catch.

A fine specimen of a native brook trout still showing fall spawning colors.
You are setting yourself up for better future fishing outings by scouting. I am not saying that if you don't catch a fish at the bridge or bend, to skip that prospective stream. If you do your research and have access, take a half hour to an hour to survey the stream. While you are doing this, be sure to check out the entomology (bug life) of the stream. Take notes of what the canopy is like. Look at the layout of the stream. Is the stream just a fast running brook, or are there pools located every hundred yards or so? Note what kind of fish you are seeing in the stream. If you catch a lot of creek chubs, this stream may not stay cool enough to have native brook trout. Once you spot check a prospective spot, take your notes and move on, even if you are picking up quite a few fish. You can always come back to this spot and dedicate an entire trip to it. With that being said I live in an area of Pennsylvania that is loaded with blue line streams. The hills of the Allegheny Mountains have a pile of blue line streams to explore in four hours. There are also many streams that may look great on a map but are affected by acid mine drainage as well. The key is planning your scouting trip to maximize the amount of small streams you can survey. Look at the travel time between each stream and plan accordingly. If you have a four hour window that you can dedicate, pick as many streams in say a fifteen mile radius as you can. Pin point the spots you are going to check beforehand by using your map.

Stream surveying is not as exciting as the next methods I will be discussing, but is not a method that I would skip by any means. It is down right effective.  Remember to keep in mind what I said about scouting. You are really only look for one or two fish on these surveys. If you take good notes, you can really set yourself up for great trips in the future.



The next section of this article will cover how to read topographic maps and how to use them in blue line fly fishing. The image below is of an prospective area that I am currently doing recon on for the spring of this year. This section of mountains is within fifteen miles of my new camp I purchased last year. This will be a good example as it has many talking points I can discuss with you. So get ready as this will be a pretty lengthy process.

 (NOTE: I blacked out any identifiable labels from this map. I am interested in helping you become a blue line angler, but will not be risking any of the spots I have been researching in the process.)

First, let's learn how to understand what the topographic map is trying to show us.  Topo mops can give a perception of a 3D image on a 2D surface like a map or computer screen. A topographic map is used to show the features of the land by the use of contour lines.  Contour lines are the brown lines shown on the map. These lines are used to show changes in elevation.  A basic rule is that the closer the contour lines are, the steeper the grade. The farther the contour lines are apart the flatter the grade. This concept is a very important one to understand. I feel that reading a topo map is one of the most important aspects of blue line angling. There is a wealth of information out there on reading and understanding topographic maps so I only wanted to give you the basic concepts.  It will be worth your while to expand your knowledge on reading and understanding this maps, but I just wanted to give you enough background to comprehend this article.

Example of a stream on a topographic map.
Let's dive into the screen shot of the map above. I want you to think of a blue line stream as an outline. The lowest section of a stream will typically be the widest section. In terms of lowest, I am speaking of lowest elevation.  This will also mean that this area will have the widest spacing of contour lines. This area is typically where the stream will be most flat in elevation as well. With every stream that flows into the larger stream, the larger stream will, more often than not, grow in size. This can be width of stream, or depth.  Typically there will be a pool where this confluence happens as well. Be sure to spend a little extra time at this pool on your fishing ventures.

 If you look at the bottom center of the map above you can see that this is the "MAIN BRANCH" of the stream. Consider this the main topic of your outline. As we move up we can see that there are two "forks" that come together to form the main branch. For reference let's just call these LEFT BRANCH and RIGHT BRANCH. So in terms of an outline this stream will look like this:

A. MAIN BRANCH
        1. LEFT BRANCH
           2. RIGHT BRANCH

For the rest of this demonstration we will refer to these streams as mentioned in the above outline. Lets focus on the LEFT BRANCH now.  As we follow the branch up we can see there is one other blue line that flows into the LEFT BRANCH for the section of stream we have selected. So now our outline would look like this:

A. MAIN BRANCH
        1. LEFT BRANCH
       a. Tributary 1L
          2. RIGHT BRANCH

Now let's look into the Right Branch. As we move up from the fork of the RIGHT BRANCH we can see that there are three blue lines that flow into the RIGHT BRANCH for the section of stream we have selected. Our outline now would look like this:

A. MAIN BRANCH
        1. LEFT BRANCH
       a. Tributary 1L
           2. RIGHT BRANCH
       a. Tributary 1R
       b.Tributary 2R
       c.Tributary 3R

So, why break streams down like this? Once you get good at recognizing streams on a map you will not have to do this at all. I am just using this as an easy way to learn how to identify these characteristics. These are all things that I now do mentally, but it wouldn't hurt to make a small outline such as this in your notes to keep information at hand.


Now we are going to dive deeper into what the lines on the map are showing us. When looking at these branches and streams we notice that they have "V" Shaped contour lines. These "V shaped  lines are what gives us our mental preview of the stream. The LEFT BRANCH shows a tighter distance between the legs of the V compared to the RIGHT BRANCH. This lets me know that the LEFT BRANCH will have a steeper grade to it than the RIGHT BRANCH.  When we look at the contour lines of the mountains the stream is running through on the LEFT BRANCH we can see that it has very steep terrain on the right side of that stream. Also in the upper section of the LEFT BRANCH we can see that it flattens out.

The mental image of the LEFT BRANCH I am getting would be a faster moving stream nestled in the bottom of a pretty steep hollow. The upper end being flat leads me to believe that there is not a lot of water volume in this stream. Tributary 1L of the LEFT BRANCH is looking more like a spring. I don't imagine there is much volume hitting the LEFT BRANCH from this stream.

Now that we have our mental image of the LEFT BRANCH figured out lets examine the RIGHT BRANCH. Looking at the "V's" of the RIGHT BRANCH we can see they are decently spaced. This lets us know that the stream does not have a very steep grade. The fact that it has three tributaries feeding it leads me to believe that the RIGHT BRANCH has more volume than the LEFT BRANCH. The RIGHT BRANCH also has a wider distance between the bottom of the mountains that the LEFT BRANCH. This lets me know that the stream has more water capacity potential than the right branch. I would imagine that over the millions of years of annual spring high water levels that the RIGHT BRANCH has eroded some of the mountains on each side away. The wider space between the surrounding mountains and greater distance between the "V's" also leads me to believe that this stream will be much easier to navigate than the LEFT BRANCH.

My mental image of the RIGHT BRANCH is a decently wide stream with more flow than the LEFT BRANCH. It will be much easier to navigate than the LEFT BRANCH. It won't be as fast as the LEFT BRANCH because of the gradual grade that it flows.

Now that we have our mental images of each stream, what else can the map tell us? Looking at the map again we see a red and white dashed symbol that snakes its way up through the mountains. This is a road. If we look at the LEFT BRANCH we can see that if flows right along the road. This leads me to believe that the LEFT BRANCH would see more angling pressure than the RIGHT BRANCH. This also would mean that I could get in and out of the LEFT BRANCH easier as well if I was short on fishing time. I could really get off of the beaten path if I fish the RIGHT BRANCH.  The clues in how far the stream is away from the nearest road may lead you to unpressured fish and banner days on the water. 

Reference of a similar stream to what I feel the RIGHT BRANCH would be like
We have our mental idea of the stream but what are we going to do with it? What is my game plan for tackling this area?  First I want to be sure that I am able to fish the streams. If it is private land I may look up the GIS information on who owns the property and seek permission. If it is public land I will just go for it. After reviewing both of these streams I feel that I would tackle the RIGHT BRANCH FIRST. The perceived easier terrain will allow me more time with my line in the water and less time navigating the stream. I don't want to give the perception that I am rushing through these streams. I am just looking to get the most out of my allotted time available to fish. I would also choose the RIGHT BRANCH first because it has 3 other streams that I can check out at the same time. These blue lines might just be trickles or small streams but this will give me a chance to explore what I call "No Namers". They have no name on the topographic map, and in my opinion are the most exciting to try.

A reference picture of what I feel the LEFT BRANCH would look like
After fishing the RIGHT BRANCH I would then go check out the LEFT BRANCH. The assumed harder access and lack of other tributaries make this a second choice. I would also assume that this stream would need to have a little more weight to the flies. The steeper grade and lack of bends would lead me to believe this stream would also have a lot of plunge pools and pocket water.

A few of the flies I use when fishing streams I feel would have faster water with deep plunge pools.
This is pretty much how I go about dissecting a stream with a topographic map. Topo maps also give me a clue as to what type of flies to take with me. I mostly use streamers and nymphs when fishing blue lines. Often these streams don't offer the best canopies for softly landing dry flies. I would be sure to have heavier nymphs and streamers if I was fishing the LEFT BRANCH. I most often have a few flies in my box with a little extra weight, but if I were going to spend a bit of time exploring the LEFT BRANCH I would tie a few extra just in case.

The mapping scenario above is a real scenario as I have never set foot on either of these streams.  When I do, I will upload a follow up and show if my hypothesis's were correct. The aspect of the unknown and seeing how close I can get with my hypothesis is one of my favorite parts of blue lining to be honest. I love seeing and catching beautiful wild trout, don't get me wrong, but nailing a breakdown of a stream and catching these trout just adds to the adventure.

An example of a map showing the features of a stream. Here we see some brush piles and a beaver dam that is adjacent to the stream.

Now I will take you to the next technique that I use when finding blue lines. Satellite maps are not as important as topographic maps for my fishing style, but these maps will give you different clues about the stream you are prospecting to add to your hypothesis. You can get a good idea of the vegetation and canopies you will encounter on the stream. These satellite maps may also clue you in on some of the structures that you may wade upon. Now, the majority of the blue lines I fish are completely covered by a canopy, but some streams you can see different features such as pools on sharp bends of the stream. You can locate brush piles, pocket water sections, and other structures as well.  You can also find homes and other dwellings that are located along the stream to ask for permission if the stream runs through properties that are not public ground.

An example of a satellite map showing a green forest surrounding a stream.

First, let's look at the vegetation on a satellite map. When you zoom in on a satellite map, look for dark green areas along the stream. These may indicate that the stream may have some coniferous trees like hemlocks or other thick canopy vegetation like rhododendron and mountain laurel. This will let you know that the shade of this type of canopy should help keep the stream cold in the summer. Also, this may let you know that you may need to take a shorter fly rod with you to combat the short canopy. I don't have many issues casting on tighter canopy streams with a longer fly rod but the issue resides in landing the fish. I am using barbless hooks 100 percent of the time.  When you hook a native brook trout they wiggle so much that you can't have your rod tip stuck in the canopy and expect to land a fish. Even with a net, you will lose so many fish by taking too long of rod on these tight canopy streams.  There are many advantages to using a longer rod if the canopy allows it however. You can stand back from the fish at a longer distance and reduce the risk of spooking the trout. The length of rod I take is entirely dictated by the stream canopy. 

On the flip side of the vegetation spectrum, you can also see clear cuts and logged areas that may not be visible on the topographic map. It only takes one or two trips to a prospective blue line stream that ends up being in the middle of a clear cut, to learn to double check your topographic hunch with a satellite map. Ripped waders and rough traveling conditions are not fun nor efficient in your adventures. You may also see that the upper and lower end of a blue line may have a dense canopy, but the lower end may have a clear cut going right trough the middle. This would lead me to believe that the middle section of that stream will warm up and may not have many trout in the lower section. This may mean that the stream may have a greater population of  brook trout above the clear cut, and more wild brown trout below. Be mindful of the canopy or lack there of when examining satellite maps.

Looking for bends and deep pools may not be easy on smaller blue lines, but on streams with a little more width to them this can be a huge advantage. If you cyber scout the stream and see a few things like that on the map you can pin these locations. You may even see a beaver dam or an old man made dam of some sort. Small areas such as these can give you hope if you are not picking up any fish on a stream, and also give you a key focal point if you are spot checking. You can examine what different bridges look like, and can pin point potential parking areas as well.

A rather large brown trout in comparison to the blue line stream the fish resided in.
I feel that using a combination of topographic maps and satellite image maps has greatly increased my efficiency of fishing blue lines. To me, getting a good mental image of the stream before I go is important.  There is nothing worse than skipping the satellite imagery step and finding yourself in a jungle of Rhododendron with a ten foot rod, or only taking hunting boots to an area that has been over taken by beavers. Also, checking to see how well I broke down the topographic map and satellite map is part of the addiction I have as well. Just like "Beast Style Hunting", blue lining is all about putting in a lot of effort to get a reward. I love when I have an amazing day on the water, just as I expected it would be.

An interactive map provided by the PA Fish and Boat Commission.
The next tactic I use is to utilize the Trout Streams Map provides by the Pennsylvania Fish and Boat Commission. This map is a blessing and a course to the Pennsylvania blue line angler. It gives you plenty of prospective streams to check out but also may put one of your best kept secret streams out there for the world to see. I have found myself on both sides of this situation as I have discovered some really stellar streams by using the map, but have also started to see boot tracks pop up on streams that have never shown any sign of human sign.  I am still blown away when I hear anglers complaining about the Pennsylvania Fish and Boat Commission. I don't know of too many other states out there that have dedicated so much time to provide its anglers access to this sort of information. There are many overlays that you can turn on and off in your search for trout within the state. 

The boxes I check in the dialog box of the PA Trout Streams Map.
These are the boxes I check in the dialog box that pops up when you first open the map.  I select these boxes when I wan't to chase wild trout.  The other choices can help you find stocked streams as well as fly fishing only or delayed harvest artificial lures only areas. I like to leave the public access areas highlighted to help with access searching. I mostly select Class A Trout Streams, Wilderness Trout Streams, and Natural Reproduction Trout Streams. These check boxes will give you a huge number of waters to explore in Pennsylvania. I prefer to utilize the Natural Reproduction Trout Streams and Wilderness Trout Streams boxes the most. These streams seem to see the least amount of pressure and are most fun to explore. They require a bit more digging and researching to find access and often have not had any biologist reports conducted on them.  Do to the uncertainty of success, these streams do not receive a lot of pressure. The Class A Streams selection means that the stream has been surveyed and the biomass of wild trout found in the stream is high enough to get the highest Class A rating. This often means more fish, but also means more pressure.  I will not go into further detail on these maps and want you to spend time on your own learning how to use them. Put in some effort to learn all of the features of these maps.

My personal best native brook trout.
I mainly use these maps last as I feel they take away a lot of the unknown about a putting in reconnaissance work on a stream. This sounds counter productive but I enjoy the struggle.  If I am out surveying streams for wild trout, and feel I should have caught fish but don't, I refer to this map to see if the stream has been surveyed and if it has natural reproducing trout in it. If I don't catch any, and it is not on this interactive map, I then put it lower on my list of prospects.  I will eventually go back to this stream at some point to explore, but will hit more productive streams first.

The addition of this interactive map has really shown more pressure to the wild trout streams that I fish especially once the stocked trout waters are shut down. I want to take a brief detour in this article from finding wild trout to discuss proper wading and fish handling techniques if you decide to give blue lining a try.  Us "Beastlike Blue Liners" really love these fish. We know that once the stocked waters close many anglers, excited about the Opening Day of Trout in Pennsylvania, may seek open waters to scratch the itch just before season. I wanted to cover these aspects in this article as I feel that it is extremely important to conserve the resource and educate anglers that may not know about the topics I am about to cover.

A beautiful winter wild brown trout held with wet hands, and gently resting on my wet wading jacket.
When fishing these blue line streams, especially from October to March and early April, the angler must pay special attention to their wading practices.  If at all possible I try to totally avoid wading in the stream.  It is often discussed to not fish over trout that are spawning, but in my opinion it is even more important to avoid trampling over redds. A redd is the spawning bed produced by wild trout during the spawning period.  Wild trout spawn in areas with loose gravel. The female fish will clear out the gravel, deposit eggs while the male fertilizes them, then cover the eggs up with more loose gravel. Fresh redds are easy to find as they are often discolored from the rest of the stream bed. By the time the stocked trout waters close redds are not as easily identifiable.  Silt and sediment has covered the gravel that was dispersed over the eggs at spawning.

When you wade these types of  streams it is best to not step foot in the stream if at all possible. If you must cross the stream, do so in faster water areas that are comprised of mostly larger rocks or silty/muddy areas. These areas are not suitable areas for redds.  Try to step from large rock to large rock to avoid stepping on any unforeseen redds. The issue is that the fertilized eggs that are buried beneath the gravel are growing into fry. These fry will not hatch from the egg until late March and April, or until the water has reached the optimum temperature for the wild trout to hatch. Most often these fry emerge just as the first hatches are coming off of the stream. It is important to wade carefully any time of the year but is vitally important from October to late March and early April.  If an uneducated angler tramples up a stream on top of redds, this can spell disaster for the wild trout population for years to come. We must pay attention to these things if we are to protect the resource.

My 2019 "Brookie of the Year" held in the water for a photo.
Proper fish handling is also another aspect that I feel needed to be discussed in this article.  Barbless hooks are must for wild trout. We want to reduce the chance of injuring these fish if they take a fly too deep into their mouth. Try your best to always have a net with you. Nets are great as you can easily keep the fish in the water, and also reduce the risk of dropping a fish onto the ground.  ALWAYS wet your hands before touching a fish. The oils of your hands can really damage the skin of the fish.  If you are taking a photo of a fish, keep the fish in the water until the moment you are ready to push the capture button on your camera or phone.  I wanted to conclude this article with these topics as keeping these fish safe and healthy should be your number one priority when blue lining.

A photo I captured of Joel and Nate of the Allegheny Native YouTube Channel
I hope this article has you excited to give blue line angling a try. I wanted to teach you some of the steps that I use and encourage you to get off the beaten path and explore our wild trout waters. The sights you see and fish you catch are breathtaking. You will be surprised at some of the places you will discover these fish. You may find a stream that is full of wild trout that you've drove past thousands of time and never once thought that trout would be present. I feel that this article gave you just enough information to build your foundation but left a lot for you to learn on your own as well. The main thing that I want you to take away from this article is to not be afraid to risk failure to get a reward. You will have days without catching a fish. You will have days where you want to give up and just chase stocked trout, but I promise you that if you explore long enough you will find your blue line glory.